The short answer
A ductless mini-split is a heat pump that heats and cools individual rooms without ductwork, which makes it a strong fit for homes with no ducts, hard-to-cool rooms, additions and ADUs. We size the system room by room, check your electrical and installation options, and give you a written estimate before any work begins.
A ductless mini-split heats and cools individual rooms without ductwork. An outdoor heat pump connects to one or more indoor units through a small line set that runs through the wall, so there's no attic duct system to build or repair. Many Los Angeles homes are good candidates: older bungalows with no central air, converted garages, and hot upstairs bedrooms. A mini-split puts heating and cooling in the rooms you actually use. EverClime HVAC Contractor installs mini-splits in Los Angeles and nearby cities. This page explains how we decide whether one fits your home and what the process looks like.
Signs a Ductless Mini-Split Makes Sense
Los Angeles has dry summers and mild winters, but conditions vary a lot by neighborhood. Inland areas and the valleys run much hotter in summer than homes near the coast, and fall Santa Ana winds can bring hot, dry spells late in the year. A setup that keeps a coastal home comfortable may struggle in a valley house with west-facing windows.
A mini-split is often worth considering when:
- Your home has no ductwork, or the existing ducts are damaged, undersized or hard to reach
- One room, addition or converted garage stays hotter or colder than the rest of the house
- You rely on window units or portable air conditioners that are noisy and only cool part of a room
- An old wall heater or floor furnace is your only heat source
- You want separate temperature control for different rooms
- You're planning an ADU or remodel and don't want to extend a central system
What We Check Before Recommending a System
A good installation starts with correct sizing. We don't guess from square footage alone. We look at each room the system will serve: its size, ceiling height, window area and direction, insulation, and how much afternoon sun it gets. An oversized unit cycles on and off and controls humidity poorly. An undersized one runs nonstop on the hottest days and still falls behind.
We also check the practical details that decide where the equipment can go:
- Wall space and mounting height for each indoor unit, with room for airflow around furniture and windows
- Outdoor unit placement, clearance, and noise near bedrooms or neighbors
- The line set route and length between indoor and outdoor units
- Condensate drainage, either by gravity or with a condensate pump
- Electrical panel capacity and whether a new dedicated circuit is needed
- Exterior wall material, such as stucco, siding or block
Repair, Replace or Add: Your Options
Not every comfort problem needs a brand-new system. If you already have a mini-split that isn't keeping up, we start by diagnosing it. Common fixable problems include dirty filters and coils, clogged condensate lines, refrigerant leaks, failed sensors or fan motors, and communication faults between the indoor and outdoor units.
Replacement makes more sense in a few situations: an older system needs a major part like a compressor, leaks keep coming back, parts are no longer available, or the unit was undersized from the start. We'll explain what we found and lay out your options. That way you can weigh a repair against the age and condition of the equipment.
For homes with central air, a mini-split can be an addition rather than a replacement, covering a room the existing ducts don't serve well. If you're replacing an aging gas furnace, a heat pump is one option to consider. South Coast AQMD Rule 1111 limits NOx emissions from gas fan-type central furnaces sold and installed in the region. The district has been amending the rule toward zero-emission requirements and sets and revises its compliance dates, so check the current rule before planning a furnace replacement.
What Affects the Cost of a Mini-Split Installation
We don't quote a price until we've seen the home, because mini-split projects vary widely. The main factors are:
After the visit, you'll get a written estimate that lists the equipment and the work involved, so you can compare options clearly.
- Number of indoor units and zones, and whether they share one multi-zone outdoor unit or use separate single-zone systems
- Equipment capacity and efficiency ratings (SEER2 and HSPF2)
- Indoor unit style: wall-mounted, ceiling cassette, floor console or concealed ducted
- Line set length and route difficulty, including runs through attics, crawlspaces or multiple floors
- Electrical work, such as a new circuit or panel upgrade
- Extras like condensate pumps, line covers, wall brackets or pads
- Permits required by your city
Rebates and Incentives in Los Angeles
If LADWP provides your electricity, you may be able to apply for a Consumer Rebate Program rebate on a qualifying heat pump system, which can include a mini-split. The amount depends on the unit's SEER2 and HSPF2 ratings. You file the application after the equipment is purchased and installed, within 12 months of purchase, so keep your paperwork.
Many homes outside the City of Los Angeles are served by Southern California Edison instead. That means the rebates available to you depend on the utility at your address, and we confirm the current offer before quoting it. Also note that the federal Energy Efficient Home Improvement Credit (25C) only covered qualifying heat pumps placed in service before December 31, 2025. It isn't available for new installations after that date.
How a Visit Works
Here's what to expect from the first visit to a finished installation:
Timing depends on the number of zones and whether electrical upgrades or permits are involved. We'll give you a clear schedule with your estimate.
- Assessment: a technician walks through the rooms you want to heat and cool, takes measurements, and checks your electrical panel and outdoor space.
- Recommendation: we explain the layout, unit locations and equipment options, and answer questions about noise, controls and maintenance.
- Estimate: you receive a written estimate to review on your own time.
- Installation: we mount the indoor and outdoor units, make a small wall opening, and run the line set, drain and wiring. Then we pressure-test and evacuate the lines before releasing refrigerant.
- Startup and walkthrough: we test heating and cooling in every zone, show you how to use the remote or app, and explain how to clean the filters.

